PASSPORT WITH ACUMERA ROUTER
R
Written by Roman c Arguello
Updated over a week ago

Step 1: Contact Acumera and request a dedicated port for the back office installation. Acumera will also need to assign a static IP to connect to the XML.

Step 2: After getting static Ip address from Acumera make sure you are connected to the port on the router that was assigned.

Step 3: Assign IP on Protocol 4

Step 4: Connecting XML Gateway

  • If Acumera needs IP for Back Office computer, Open CMD and type ipconfig /all. You will see the I.p. give this I.p. to acumera so they can set it up to get XML files.

  • (Note: Default Known I.P. For passport with Acumera is 192.168.44.16)

Did this answer your question?