Step 1. Back Office computer is connected to the PORT 1 or the Port 7 on Pay Safe UTM router ( port 7 is the proffered port for back Office)
VIA network cable


Step 2: Right click on the Ethernet Adapter network and click on properties [?]

Note: In the Adapter Settings screen, there are a list of networks, you should see your Ethernet Adapter plugged in

Step 3: On the Properties window, select option Internet Protocol Version 4(TCP/IPv4) and click on properties.

Step 4: On the new Properties window select the option labeled as "Use the following IP address", and type the following information.

I.P. address 10.96.10.2

  • Subnet Mask 255.255.255.0

  • Default gateway 10.96.10.1

  • Preferred DNS 8.8.8.8

  • Alternate DNS 8.8.4.4


Step 5: On the "Map Network Drive" window enter the following:

  • Select the Drive as Z (if Z is taken, any other letter will work)

  • Enter the path name under the folder option: \\10.5.48.2\XMLGateway

Note*** Internet and XML will work on a single cable***

Did this answer your question?