Step by Step instructions:

Step 1: Go your Passport register and log in to the highest level access.

Step 2: Select the following tabs: Manager Workstation > Setup > Store > Back Office > Back Office Interface

Step 3: Under the tab "Document Generation" there are two columns, "Store Close" and "Shift Close",

Step 4: On the "Store Close" column UnCheck Top 3, and leave the rest as selected.

i.e. UnCheck -Fuel Grade Movement by 'Actual Sell Price', by 'Till' and by 'Dispenser'.

Step 5: On the "Shift Close" column make sure nothing is selected.

Step 6: Once you click on save, click OK on the top message, Yes on the second and Yes on the third.

Step 7: When Done, you'll be directed back to the POS screen - otherwise click on POS screen and at this point you are done with the Passport Back Office settings

Did this answer your question?